Filter
Top Products
33
6. 5 Display Setup
6.5.1 Display-Main Monitor Seq Setup
The Main Monitor Sequence Configuration allows administrator to define the Display
Pages in Sequence Mode display.
SEQ Mode
There are 7 Sequence Mode display types – Full, 4-Window, 7-Window, 9-window, 10-window, 13-
window and 16-window. Select the Sequence Mode display type and the settings below are
corresponding to the selected item. Default value is “Full Window”.
Total Pages
Select the desired total page number from the list. Maximum page numbers for each SEQ Mode:Full
Window: 16 pages, 4-Window: 7pages, 7-Windows: 4 pages, 9-Windows: 3 pages, 10-Windows: 3
pages, 13-Window: 3 pages, 16-Window: 2 pages.
Dwell Time
Select the Dwell Time (1 ~ 99 Sec) for each selected page. Default value is “5” seconds.
Current Page
The total page number is varied by the above items. Select the desired page, and the selected page
will be shown in the view window below.
The display camera can be defined from the view window. Use buttons or “Shuttle”to move
focus to the view window.
While the focus is in the view window: Use or “Jog” to move between display. Press “CH Set”
to set the corresponding window as desired channel if necessary (Please refer details of CH Set in
Chapter 4.1). Press “Exit” to leave the view window and back to the previous item.