Filter
Top Products
VR101S
Users Manual
10
Setting the Time and Date
It is very important that your PC system’s time and date
are correct before running the EventView program.
When retrieving data from the recorder, the EventView
program uses the PC’s internal clock for time and date
reference. (See the following note.)
• With Windows running, set the time from the
Control Panel in Program Manager.
• Windows 95/98/NT users open the Control Panel
from the Taskbar by choosing Start, Settings, and
Control Panel.
Information about setting the time can be found in the
Windows User’s Guide.
Note
If your PC’s internal clock switched from
summer time to winter time or vice versa
during the period that the VR101 is capturing
events, you should correct the Start Time and
the End time (if date and time indicated) of the
events that occurred up to the time change by
adding or subtracting one hour. (See “Viewing
the Events Tab on page 23.