Filter
Top Products
VR101S
Users Manual
16
Describing the Site
Site Description
gives you the opportunity of specifying
the location of the recorder, for instance, if you need to
distinguish between the locations of three recorders in
one office. You may describe the site in your own words
using up to 30 characters. The site description will also
appear as the title of a Quick Summary, a Transient
Graph, and an Event Distribution Graph.
Viewing Realtime Readings of the Recorder
After establishing communication, leave the wand in the
optical port while the recorder is plugged into an outlet
to see, in real time:
• Line voltage readings (the voltage between the hot
and neutral lines)
• Ground voltage readings (the voltage between the
neutral and ground lines),
• Line frequency readings (the frequency between
the hot and neutral lines)
These readings appear under the
RealTime
heading.
You can turn realtime reading off and on by clicking on
the red Scan button.
Note:
The recorder can NOT record events during
realtime reading. Click the red scan button to
stop realtime reading and to resume event
recording.
Note that if the recorder is not plugged into an outlet
while the wand is in the optical port, real time reading
will stop after a few seconds to conserve power.
Viewing Recorder Information
Under the heading,
Recorder Info
, you will be able to
see the number of events saved in the recorder and the
time span over which the data was collected.
If no events have been gathered, the words
No Events
Stored
will be displayed.