Filter
Top Products
19
Chapter 3
Retrieving and
Saving Events
Retrieving Events from a Recorder
1. With the Main VR101 window open, and with the
Optical Interface Cable connected to your
computer, ensure that the wand is blinking. If it is
not, choose Scan from the Communicate menu
(or, on the ToolBar, click the red scan button so
that it flashes).
2. Place the wand into the recorder’s optical port. The
Site Report window will open at the Status tab.
3. To download the recorder’s stored events to your
computer, click the Events tab.
Downloading will start. During download the Cancel
Download button (to the right of the Scan button)
will become activated enabling you to stop the
download.
4. When all events have been copied to your
computer, you may remove the wand from the
recorder.