Filter
Top Products
VR101S
Users Manual
12
• Windows 95/98/NT users click Start on the
Taskbar, and choose Programs, Fluke PQ Tools
and then EventView.
(Select Update Readme to read the latest information
about the VR101S.)
The main FLUKE EVENTVIEW window will open.
Selecting a COM Port
• With the main FLUKE EVENTVIEW window open,
from the Communicate menu choose the COM port
that the Optical Interface Cable is connected to.
The Communicate menu displays the available COM
ports on your computer.
When you have chosen the correct port, the optical
wand and the red scanning button on the ToolBar will
start to flash. When the wand is flashing it is ready to
communicate with the recorder. If the wand doesn’t
flash, please refer to Chapter 5 “Troubleshooting”.
Opening the Site Report Window
1. With the main VR101 window open, the Optical
Interface Cable connected to a COM port, and the
red scan button flashing, point the optical wand at
the optical port of the recorder (from 0.25” away or
closer) or plug the wand directly into the recorder’s
recessed optical port.
The Site Report Window will open.