Filter
Top Products
12
LifeBook S Series – Section Two
Figure 2-10 LifeBook notebook bottom panel
BOTTOM COMPONENTS
The following is a brief description of your LifeBook
notebook’s bottom panel components.
Port Replicator Connector
This connector allows you to connect the Port Replicator
to your notebook. (Figure 2-10)
Memory Upgrade Compartment
Your LifeBook notebook comes with high speed
Synchronous Dynamic RAM (SDRAM). The memory
upgrade compartment allows you to expand the system
memory capacity of your LifeBook notebook, hence
improving overall performance. (Figure 2-10) (See
Memory Upgrade Module on page 51 for more informa-
tion)
Lithium ion Battery Bay Lock Button
Slide this lock button to lock/unlock the internal battery.
(Figure 2-10)
Lithium ion Battery Bay Release Button
Slide the release button to release the internal battery.
(Figure 2-10)
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium ion battery.
(Figure 2-10) (See Lithium ion Battery on page 41 for
more information)
Main Unit and Configuration Label
The configuration label shows the model number and
other information about your LifeBook notebook. In
addition, the configuration portion of the label has the
serial number and manufacturer information that you
will need to give your support representative. It identi-
fies the exact version of various components of your
notebook. (Figure 2-10)
Memory Upgrade
Compartment
Lithium ion
Battery Bay
Main Unit and
Configuration
Label
Port Replicator
Lithium ion
Battery Bay
Release Button
Lithium ion
Battery Bay
Lock Button
Hard Disk Drive
Connector
Certificate of
Authenticity
Label (approximate
location)
S Series.book Page 12 Friday, April 20, 2001 5:16 PM