Filter
Top Products
6
Setting up the hardware
For detailed instructions about connecting to a display
device, see page 15.
For detailed instructions about connecting the audio/video
source, see page 12.
4 Connect to a display
Connect to a monitor or television using a
VGA, DVI, or television cable.
1 Connect the modem or
broadband Internet (optional)
2 Connect the audio/video source
A coaxial (TV in) connection carries both the
audio and video signals.
If you use an S-Video
or a Composite video
connection, you will also
need to connect audio using
RCA or Toslink stereo plugs.
3 Connect the IR control
Plug one end of the IR control into your
computer, then stick the other end to the
set-top box sensor window.
1
5
3
4
3
remove the adhesive
paper from the back of
the IR control
1
4
2
1
1
Gateway FMC-901 Media Center
Gateway FMC-901X Media Center
For detailed instructions about connecting the IR control
cable, see page 14.
For detailed instructions about connecting to an audio
system, see page 17.
5 Connect to an audio system
2
2
2
5
5
5