Filter
Top Products
CHAPTER 1 - THE DUAL-DECK SYSTEM 11
Remote Control
Before you begin, be sure to put the two supplied AA
batteries in the remote.
Your remote control makes it simple to operate
and program your Dual-Deck VCR. Take a moment
to learn where the buttons are located on the
remote control.
POWER
Press to turn your Dual-Deck VCR on and off
or to set the Auto Power OFF mode.
COPY
Press to copy tapes from Deck One to
Deck Two.
PLAY/ATR
Press to play a tape in the active deck. If you
have manually adjusted tracking using the
TRACKING keys, press this key for 1.5
seconds to reactivate Automatic Tracking.
INDEX
Press to begin an Index Scan or an Index
Search. Enter two numeric digits and then
press the Fast Forward or Rewind key to
initiate the search. In search, the VCR counts
to the desired mark and begins play. This can
be done either when the deck is playing or is
stopped. Press FF or REW without entering
digits to initiate a scan. In scan, the VCR stops
at each index mark, plays 5 seconds, and
moves on. Press while recording to place an
Index Mark on the tape. An Index Mark is also
automatically placed on a tape every time you
begin recording from stop.
LCV
Last Channel Viewed. If you have a certain
channel you want to come back to easily, enter
it using the numerical keys. Then you can flip
through other channels using the up and
down channel keys and easily return to this
channel by pressing the LCV button. This is
also the Change button.
SELECT
Press to move up and down the items on
the menu screen when in On-Screen
Programming. This key is also used to move
you to the next selection in the Set Date/Time
and Timer Record menus. This is also the
Mute button.
TV/VCR
Press to switch the antenna connection be-
tween your VCR and your TV. When in VCR
mode, VCR will appear on the Front Panel
Display. TV mode is the same as if your VCR
were turned off.
MUTE
Press to turn off the audio (sound). Press
again to turn the audio back on. This will not
affect recording. This is also the Select button.
TRK
—
+
—
+
SLOW
—
+
100
POWER
COPY
VIEW
TV/VCR OSD
MENU
CLEAR
MUTE
LCV
SELECT
CHANGE
CH
INDEX SKIP CLK/CTR
REC
REW
FF
PAUSE
PLAY/ATR
DECK
SELECT
STOP/EJ
■/▲
AUX
PICTURE
ZERO RTN
TV VCR
NOTE:
Some buttons have a dual function.
The alternative function is
listed above the button.