Go-Video 4-Head Hi-Fi VCR User Manual


 
56 DISCOVER THE DUAL-DECK DIFFERENCE
Cleaner will catch normal residue, but with heavy
VCR use, or the playing of old, well-used or damaged
video tapes, the accumulation of dirt over time will
cause blurs or streaks in the video and video copy
image. If left unchecked this dirt build-up can also
eventually degrade or even ruin the video tape heads
in your Dual-Deck VCR.
To avoid unnecessary repair service charges and
maintain your Dual-Deck VCR’s quality video image
and copy performance, we recommend that you:
Use only high-quality video tapes.
Periodically clean the Dual-Deck’s video heads at
home with a quality ‘wet’, non-abrasive head-
cleaning tape. (Tape head cleaners look like blank
tapes. Wet head-cleaning tapes require that you
add a liquid cleaning agent before you insert them
into your VCR. Dry head-cleaning tapes are
abrasive and may cause wear on heads.)
With heavy rental tape use, you should consider
scheduling an annual professional video head-
cleaning (and replacement of the Dual-Deck’s
Automatic Head Cleaner) at your local authorized
Go-Video service center.
Care of Videotapes
Do not expose tapes to direct sunlight, extreme heat or
extreme cold. Do not disassemble any cassette. Do not
touch the tape. Rewind tapes after use and store in
protective cases. Remove the record safety tab to
prevent recording over previous recordings.
Humidity Requirements
If your Dual-Deck VCR is suddenly moved from a cold
to a warm place, moisture may form inside the unit.
Before operating, allow at least 2 hours after plugging
in the power cord for your Dual-Deck VCR to dry
completely. Failure to do so may cause damage to
your Dual-Deck VCR and the tape. See ‘Environment’
in the Technical Specifications section of this Guide
for specifications.
NOTE:
DO NOT attempt to open your Dual-Deck
VCR and clean the video heads yourself.
Cleaning by any other means than a
head-cleaning tape or trained
professional will void your warranty