Filter
Top Products
62 DISCOVER THE DUAL-DECK DIFFERENCE
STOP/EJECT Press this button on the remote control to stop the
tape in the active deck. Press again to eject a
stopped tape.
TRACKING Occasionally, when you play a tape that was recorded
on a different VCR or camcorder, white streaks
appear if the recorded tracks do not align precisely
with the playback heads on the VCR. Pressing the
Tracking buttons on the remote control allows you to
manually adjust the tracking while playing a tape.
TUNER Device used to receive signals coming into your
television which selects the one channel you want to
watch from all the different channels which you
have available. The Dual-Deck VCR has a 181 channel
tuner. See pages 17 and 35 for a detailed explanation.
TV/VCR Press to switch control of the picture between the TV
and the VCR. This is the antenna switch. When set to
TV, the antenna signal goes directly to the TV bypass-
ing the VCR; when set to VCR, the antenna signal
goes through the VCR. When the VCR power is off,
it is the same as TV mode.
VIEW The signal chosen to be seen on the TV or monitor
(Deck One, Deck Two, Tuner, AUX).
VCR This indicator will be on when the VCR is in VCR
mode and off when the VCR is in TV mode.
WEEKLY Weekly Timer Recording Event which repeats every
seven days at the same time.
ZERO RETURN From stop, press this button and the currently active
deck will forward or return to counter time (00:00:00)
and stop.