Filter
Top Products
44
OPERATION
Programming a Playlist
Programmed play allows you to select tracks on a CD for playback in
a specific order, skipping tracks you don’t wish to hear and reordering
other tracks to suit your tastes.
To program a disc for playback, follow these steps:
1. Load the desired disc, but stop play if it begins automatically. Playlists
may only be programmed in Stop mode.
2. Press the Info Button to display the PLAYER INFORMATION menu.
Use the Navigation Buttons to highlight the icon for the PROGRAM
submenu, and press the Enter Button to display it.
3. Use the
⁄
/
¤
Navigation Buttons to highlight the Playlist setting.
Press the Enter Button so that the setting changes to Programmed
Order and a grid of program steps appears on the bottom of the
screen (see Figure 54).
Figure 54 – Programmed Play Screen
4. At this time the playlist will simply contain the tracks in the disc’s
order. Thus, Step P01 will display track 1 from the disc, Step P02
will display track 2 from the disc, and so forth. The track assigned
to Step P01 will be highlighted. Use the Numeric Keys to enter the
number of the track on the disc which you wish to hear first in your
playlist. When you have finished entering it, press the
› Navigation
Button to move to Step P02.
5. Continue entering the disc track numbers into the desired program
step positions. You need not do so in step order; you may use the
Navigation Buttons to navigate to any step in the list.
6. Press the Clear Button to remove a track from the playlist.
7. Although you may enter fewer programmed steps in your list than the
number of tracks on the disc, you may not repeat tracks within the
list. However, while the playlist is playing, the normal Repeat functions
will be available.
8. When you have finished entering all of the tracks in your playlist,
press the Play Button to begin playback of your programmed list.
During programmed play the track number shown in the front-panel
display will reflect its normal order on the disc. However, the Program
Indicator will light to remind you that the disc’s tracks are playing in
programmed order.
To cancel programmed play, stop play and perform one of these steps:
1. Open the Disc Drawer.
2. Press the Playlist Button. The Playlist Banner will appear on screen.
Each press of the Playlist Button will toggle the mode between
programmed order and disc order.
3. Press the Info Button and navigate to the PROGRAM submenu, as
described above in Step 2 of the instructions for programming a
playlist. With the Playlist setting highlighted, press the Enter Button
until the setting reads Disc
’
s Order.
DVD 38 OM(color).qxd 2/7/07 3:58 PM Page 44