HP (Hewlett-Packard) 7570e Projection Television User Manual


 
A-1
Appendix A: Technical
Specifications
Appendix A:
Technical Specifications
Minimum System Requirements
Your computer should meet or exceed these requirements:
IBM or compatible Pentium/133 Mhz processor or above
Microsoft
®
Windows 95
®
, Windows 98
®
or Windows NT
®
4.0
NOTE: For Windows NT, Service Pack 3 or greater is required.
32 MB RAM
Hard drive with at least 528 MB storage capacity
35 MB free hard drive space for installing the software described in
the User’s Guide
High-speed parallel port (EPP or ECP) set to:
- IRQ 7 and I/O address 378 or
- IRQ 5 and I/O address 278
In Windows 95/98, to check the configuration settings of your parallel
port:
- Right-click on the My Computer icon
- Select Properties
- Select the Device Manager tab
- Double click Ports (COM & LPT)
- Highlight Printer Port
- Click on the Properties button
- Select the Resources tab
- Look at the numbers listed for Input/Output Range (I/O)
and Interrupt Request (IRQ)
If the numbers need to be changed, see the documentation that came
with your computer.