Filter
Top Products
AUTO SET UP
AUTO SET UP
Setting the channel automatically
1 Plug in at the power supply outlet after completely connecting all cables. Please refer to page 10 to
16 on "HOOKUP" sections.
The VCR will be in the standby mode at this stage.
2 Press the POWER button on the VCR to start the auto set up.
This screen appears to show that the channel is being set.
The dash " - " puts out lights one by one as shown on the VCR's display.
The VCR will automatically store channels received in your area.
It takes about 2 - 3 minutes.
When the auto set up is complete, the channel with the lowest number appears in the VCR's display.
Notes
If you press the POWER button inadvertently before connecting all cables, follow the steps on page
20 for further tuning function.
If you press the POWER button during auto set up mode, the VCR automatically switches to the
STOP mode.