Filter
Top Products
INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR
INTEGRATING YOUR STEREO SYSTEM WITH YOUR
VCR
Hookup
When your VCR is connected to a stereo system, you can:
Make high quality "audio only" recordings for up to 6 hours (on a T-120 video cassette tape).
Receive quality stereo sound from your VCR through your stereo system.
Use the VCR as an extra audio tape deck for dubbing.
* PURCHASED SEPARATELY
To record from stereo
BEFORE YOU BEGIN...
Make sure the VCR is connected to your stereo system, as shown above.
Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on page 38, of
"RECORDING OPERATIONS" section, "Stereo vs. mono sound".
Select VCR recording speed (SP or EP) as shown on page 35, of "RECORDING OPERATIONS"
section, "Basic recording steps".
1 Press the AVX button on remote control, so that L (line) on the display.
2 Turn on the stereo, and start the selection you wish to record.
3 Press the REC/IRT button on VCR or REC button on the remote control to start recording.
4 Press the STOP button to stop recording.