Filter
Top Products
GUIDE INDICATIONS IN THE VCR DISPLAY
GUIDE INDICATIONS IN THE VCR DISPLAY
Guide indications in VCR display and OSD screen
The following indications appear in the VCR display and OSD screen to tell you the current status of your
VCR.
ODS Indication When it appears Meaning and
troubleshooting
(flashes for about 5
seconds)
When programming the timer
The VCR clock has
been set to "--:--". Set
the time and program
the timer.
(flashes for about 5
seconds)
When programming the timer
(by using VCR display)
A non-existing
PlusCode number has
been entered. Check
the PlusCode number
of the program and
enter it again.
(flashes for about 5
seconds)
When programming the timer Eight programs have
already been stored.
Cancel unnecessary
program and transfer
the new program.
(flashes
uninterruptedly)
When you turn power off after
programming the timer, or
transfer the programming with
the power off
A cassette has not
been inserted or a
cassette without safety
tab has been inserted.
A cassette without
safety tab will be
ejected automatically.
Insert a cassette with
safety tab intact.
Display for about 5
sec.
(flashes for about 3
seconds)
When you press the play, record,
fast forward, rewind or super
index button
A cassette has not
b
een inserted. Insert a
cassette.
Display for about 5
sec.
(flashes for about 3
seconds)
When you press the record
button for recording or
dubbing, or press the
(VIEW/SKIP/BLANK)
button for BLANK SEARCH
A cassette without
safety tab has been
inserted. It will be
ejected automatically.
Insert a cassette with
safety tab intact.
(flashes for about 3
seconds)
When you turn power on
The video heads are
dirty. Cleaning them
is recommended. To
switch off the CL
display, clean the
heads, turn the power
off and press the
channel
button.
The CL display
automatically switches
off when recording
and playback are
performed for about 5
hours after it appears.