Filter
Top Products
PRE-TUNING THE VCR TUNER
PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Presetting the received channels without using a cable box (Hookups
[A], [B], [C], or [D])
Press the POWER button to turn on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the
cursor button to select the SETUP option, and press the ENTER button.
4 Press the
cursor button to select the CHANNEL, and then press the ENTER button.