Filter
Top Products
EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM
4 Press the
button to select VCR PLUS+ SETUP, and then press the ENTER button.
Note: If you have set up the cable box, the following operation is not necessary.
5 Press the
cursor button to select "NO", and then press the ENTER button.
A small arrow points to a blank "- -" in the CHANNEL column.
Note: If your broadcast channel number is the same as the VCR Plus+ Channel in your TV listing do not
enter any number.
6 Press the CH (
/ ) button to move up and down through the channel list until you reach VCR
Plus+ CH42.
7 Press the number buttons to assign your broadcast channel number to the corresponding VCR
Plus+ channel.
In this example broadcast channel 38 is assigned to VCR Plus+ channel 42.
Note: If you enter a wrong digit, Press the CLEAR button to erase the wrong number and enter the correct
one.
8 Repeat steps 6 - 7 for all channels that need to be assigned.
9 Press the GUIDE button to end the setup procedure.
You are ready to begin delayed recording with the VCR plus+ system.
Using the VCR Plus+ system to record a program (by using TV screen)
1 Insert a blank or erasable tape.
The power comes on automatically and the tape indicator lights on the display.