Filter
Top Products
SETTING THE CLOCK
SETTING THE CLOCK
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Tips
1 You'll need to set the clock when first hooking up your VCR, and any time the power goes out more than 30
seconds. When you first plug in the VCR or after a power outage, the clock display will read "--:--".
To set the clock
Note: Turn on the TV and select the video channel (3 or 4). Or, if you are hooked up with an audio/video cable,
set the TV to AUX or VIDEO.
1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
You may view all the on-screen instructions in English, French, or Spanish. When you first set up
your VCR, it will be set to English. Press the cursor button to select LANGUAGE option, and
then press the cursor button for French or for Spanish.
2 Press the cursor button to select the SETUP option, and then press the ENTER button.
3 Press the cursor button to select the CLOCK, and then press the ENTER button.
4 Press the or cursor button to change the hour.
The "AM" or "PM" can be select when you change the hour.