Filter
Top Products
CABLE BOX SETUP
6 Press the GUIDE button. The main on-screen menu will appear on the TV screen.
7 Press the cursor button to select SETUP option, and then press the ENTER.
Note: Refer to the cable box owner's manual to identify the cable box output channel (usually 3 or 4).
8 Press the
cursor button to select "VCR PLUS+ SETUP", and then press the ENTER button.
9 Press the ENTER button to answer "YES" to the question "IS CABLE BOX BEING USED?"
Or, if you want to select "NO", press the
cursor button and then the ENTER button.
If you select "YES", you need not operate "VCR PLUS + SETUP" (see page 44). During delayed
recording, the VCR channel will automatically switch to the cable box output channel.
10 Using the VCR remote, press the
or cursor button to enter the cable box output channel
numbers.
11 Press the GUIDE button to end this setting.