Filter
Top Products
VIEWING THE ON-SCREEN DISPLAY
VIEWING THE ON-SCREEN DISPLAY
Switching between the clock, time counter and time of
remaining tape
Press DISP while the on-screen display is displayed. The on-screen display switches in the order below
together with the VCR's display..
Press the DISP button to see the clock..
Press the DISP button a second time to see just the time counter.
Notes:
The linear time counter operates only if there is something recorded on the tape.
The counter changes to 0:00:00 when the tape is ejected.
Press the DISP button a third time to see the tape remaining time.
Note: Immediately after the tape is inserted, "-:--" will appear. 2 minutes after playback or recording is
started, the tape remaining time is displayed.
Press the CLEAR button repeatedly to switch the type of tape is used. The correct remaining time will
appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape
T-180: T-180 tape
T-210: T-210 tape
Notes:
The tape remaining time is not displayed correctly for a tape without any recordings or tapes other than
T-30/60/90/120/140/160/180/210.
The remaining time may not be displayed correctly during fast forwarding or rewinding.