RECORDING A PROGRAM
RECORDING A PROGRAM
Before you record
Note: The cassette safety tab must be in place in order to record.
The VCR must be hooked up properly for recording. See the Simple Hookups at the beginning of this manual.
Copyright infringement warning
Most television programs and films are copyrighted. This means that someone has legal rights governing the
reproduction and distribution of this material. In certain circumstances, copyright law may apply to private in-home
taping of copyrighted materials. In most cases, it is okay to record for personal use, as long as you do not sell the
material. You must act responsibly in this area - check into the matter if you are unsure.
Basic recording steps
Note: You may use a blank tape or you may record over a previously recorded (erasable) tape.
1 Turn on TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Insert a blank or erasable tape.
The power comes on automatically and the tape indicator lights on the display.
If a cassette without its safety tab is inserted, playback starts automatically, and you cannot complete
the record operation.
3 Press the TAPE SPEED button to select SP (standard play, for the best picture quality) or EP
(extended play, for the longest recording time on a single tape).
4 Press the CH ( / ) button or the number buttons to select the channel you want to record.
Example: Select channel 8.
100/ENT and and for the channel 124.