Filter
Top Products
INDEX WITH THE TIME COUNTER
INDEX WITH THE TIME COUNTER
To find specific sections on a tape
Indexing with the Time Counter
You can set the time counter to memorize a certain point in the video programming, and you can return to that point
automatically.
1 Press the DISP button two or three times.
The counter will appear in the VCR's display.
2 Begin recording or playing back a tape.
3 At the point that you want to go back to, press the CLEAR button.
This resets the counter to 0:00:00.
4 Press the STOP button when you are done recording or playing back the tape.
5 Press the REW button to rewind the tape.
It will automatically stop at the spot where you cleared the counter in step 3.
Press the PLAY button to watch the tape from the selected spot.
Notes:
Press the DISP button to turn the counter display off. The selected spot will stay in memory until you set a
new one or until the tape is ejected.
During super rewind/fast forward, the tape does not stop automatically even if the counter reads "0:00:00".