Filter
Top Products
Administrator’s Guide and Operating Instructions
15
6. Setup (Administrator)
To login as an Administrator, please click on the Login icon, and
enter the appropriate Administrator’s Login name and Password (the
factory default value for both of them is admin).
To setup the behaviors of the system, please click on the Config icon.
The configuration menu will pop up as below.
Click on the menu item for the respective configuration. For the
details of each item, please refer to the following paragraphs. Click
on the Exit menu item to exit the setup. If the configurations related
to Time Type are changed, you may be asked to restart the system for
those new settings to take effect.
Note: If the system is in Sequence Mode display (please refer to Chapter 4), the
Display Seqs menu item will be grayed and not accessible.