Filter
Top Products
Administrator’s Guide and Operating Instructions
23
6.6 Video Loss Action Setup
The Video Loss Actions allow the administrator to define how the
digital video recorder responds to the detected video loss for the
cameras. There are up to 8 Video Loss Actions that correspond to 8
Alarm Outputs for most applications. The Focus Camera is always
the camera with the detected video Loss. For each Video Loss
Action, you may configure its behaviors as shown on the screen and
described below.
Operations:
After the VLoss Action menu item is selected, the Video Loss
Action Setup dialog box will be shown on the screen.
Please click on the item in the Action List, then click on the Action
Tag, and then enter the new tag name for the selected Action by
using the mouse or the keyboard. All the other settings correspond
to the selected Action shown in the Action Tag. Please refer to the
Alarm Action Setup for the descriptions and operations, except the
followings:
There is no post-record time or call display because the video is lost.
The Focus Camera is always the camera with the detected video loss.
VLoss A01
VLoss A01
VLoss A02
VLoss A03
VLoss A04
Corresponding camera
05
Alarm 01
30