Filter
Top Products
Administrator’s Guide and Operating Instructions
22
6.5 Motion Action Setup
The Motion Actions allow the administrator to define how the digital
video recorder responds to the detected motion for the cameras.
There are up to 8 Motion Actions that correspond to 8 Alarm
Outputs for most applications. The Focus Camera is always the
camera with the detected motion. For each Motion Action, you
may configure its behaviors as shown on the screen and described
below.
Operations:
After the Motion Action menu item is selected, the Motion Action
Setup dialog box will be shown on the screen.
Please click on the item in the Action List, then click on the Action
Tag, and then enter the new tag name for the selected Action by
using the mouse or the keyboard. All the other settings correspond
to the selected Action shown in the Action Tag. Please refer to the
Alarm Action Setup for the descriptions and operations, except the
followings:
The response duration and post-record time are as long as the period
when the motion is on. So, they are not listed above.
The Focus Camera is always the camera with the detected motion.
Motion A01
Motion A01
Motion A02
Motion A03
Motion A04
Corresponding camera
05
30
Alarm 01