Administrator’s Guide and Operating Instructions
52
Video Format
NTSC/EIA or PAL/CCIR, auto-sensing
Video Input
16 camera inputs with loop through (BNC), 1Vp-p/75ohm
Video Output
Main Monitor
1 D-SUB 15-pin computer monitor output
1 BNC composite video output, 1Vp-p/75ohm (option)
1 mini-din S-video output, 1Vp-p/75ohm (option)
Call Monitor
1 BNC composite video output, 1Vp-p/75ohm
Video Compression
JPEG and MPEG-1 I Frame
Video Resolution
352x240 (NTSC) or 352x288 (PAL)
Video Display
1/4/7/9/10/13/16 video windows, 16 million colors
Display Resolution
640x480 for NTSC, 800x600 for PAL
Video Freeze
Yes
Sequential Switch
Programmable, with adjustable dwell time (5-100 seconds)
Alarm Input
24 inputs, Contact or TTL/CMOS signal, polarity selectable
Alarm Output
4 Normally Open, 4 Normally Closed relay outputs
Hard Disk Storage
Up to 2 sets of Hard Disks, hot swappable
Hard Disk Extension
Up to 16 sets of Hard Disks, hot swappable
Hard Disk Type
IDE Type, 3.5” half height
Recording Rate
Up to 60 fps for NTSC, 50 fps for PAL, independent of
camera types
Recording Mode
Time-lapse recording, Event recording
Playback Rate
Up to 30 fps for NTSC, 25 fps for PAL
Playback Search
Radar search, Thumbnail search, Time search
Motion Detection
Yes, with configurable detection area (16x12) & sensitivity
Video Loss Detection
Yes
Event Log
Yes
User Interface
Windows look and feel
Setup
On screen setup
User Input Device
Mouse (Keyboard: optional)
Buzzer
Yes
Timer
Built-in real time clock
Watch Dog Timer
Yes
Title
10-character title generator for each camera, alarm input, and
alarm output
Flash Memory
8 MB
Security
Multi-level password protection
System Recovery
Auto power on after power loss recovery
Power Source
110V/220V AC, selectable
Power Consumption
150W Max.
Dimension
426(Width) x 480(Depth) x 176(Height)mm