JVC BD-X200E DVD Player User Manual


 
E-36
Settings & Controls for Recording
Setting the Encoding Format for Audio & Video (continued)
Audio Encoding
AUDIO ENCODE
This parameter is used to set the encoding format for audio data.
LPCM : Linear PCM encoding
DOLBY DIGITAL : Dolby AC3 encoding.
MPEG : MPEG encoding.
Guide to Recording Times
The time available for recording on a disc will depend on the video encoding bit rate and audio encoding format that have been set.
Furthermore, the more titles a disc contains, the less time will be available for recording. Use the following table as a guide to the
amount of time available for recording.
Notes
If the SET UP button is pressed while in Recording mode, the video bit-rate setting and audio encoding format will be
displayed on-screen. Press the SET UP button once again to hide this information.
When recording a music source it is recommended that the setting is either DOLBY DIGITAL or LPCM.
For MPEG, there can be deterioration in the sound quality, depending upon the compression characteristics.
Audio encoding format
Encoding bit rate
9 Mbps 8 Mbps 7 Mbps 6 Mbps 5 Mbps 4 Mbps 3 Mbps 2 Mbps
DOLBY DIGITAL 62 min. 69 min. 78 min. 89 min. 104 min. 126 min. 160 min. 218 min.
MPEG 63 min. 70 min. 79 min. 91 min. 107 min. 130 min. 167 min. 231 min.
LPCM 68 min. 77 min. 88 min. 102 min.