Filter
Top Products
E-60
Playback
Playing Back a Finalized Disc
This DVD recorder can also be used to playback discs that it has recorded and finalized.
When a disc is finalized, its title menu will be used to create the top menu.
The action taken by your BD-X200 when a disc it has finalized is inserted or when playback of a title has ended will depend on the
settings of DISC IN ACTION and TITLE END as set on the RECORDER MENU (2/2) screen during recording.
* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been
finalized.
1.
Insert a disc.
Depending upon the INTRODUCTION TITLE item and the DISC IN ACTION item settings of the RECORDER MENU (2/2)
screen during recording, the operation will differ. Operate in accordance with the table below. (For the operation with a disc
with a DVD MENU TYPE item set to NONE, refer to page 61.)
DISC IN ACTION setting made during recording
MENU TITLE
The title menu will appear
2.
Select the number of the title to be played.
Use the t, 8, 7, and 6 buttons to select the title number
for playback.
3.
Press the SET button to begin playback.
4.
Set to Still mode.
This is done by pressing the PAUSE button.
● The DVD recorder enters Still mode.
● If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.
5.
Restart playback.
Press the PLAY button.
Ⅵ The DVD recorder will behave as follows when title playback has ended.
These actions will depend on the setting made for TITLE END from the RECORDER MENU (2/2) screen during recording.
6.
Stop playback.
This is done by pressing the STOP button.
● The DVD recorder enters Stop mode.
Playback starts automatically from the first title.
Set to MENU
Enters stop mode and the
title menu (TOP MENU) is
displayed.
INTRODUCTION TITLE item setting during recording
Set to OFF Set to ON
The action set in the DISC IN ACTION item is carried out.
(See below.)
The introduction title (opening movie) is automatically played.
After playback is finished, the action set in the DISC IN ACTION
item is carried out. (See below.)
STOP button
Cursor buttons
(t, 8, 7, and 6)
PLAY button
PAUSE button SET button
OPERATE
PHONES REV
STOP PLAY
DVD RECORDER
BD-X200
FWD PAUSE REC
BUSY
OPEN/CLOSE
TOP
MENU MENU
OPTION DV Y/C LINE
SET UP
AUDIO
CH1
CH2
TITLE
DOLBY DIGITAL
LPCMMPEG
CHAPTER
SET
TITLE END item setting during recording
Set to REPEAT
Repeats playback within
the title.
Set to STOP
Enters the stop mode. The
title menu (TOP MENU) is
not displayed.
Set to NEXT TITLE
Next title is played. When playback
of the final title finished, the first title
is played. (Disc repeat playback)
Caution
● During playback of a disc, if the input setting
is DV then the sound can be delayed. In this
case, change the input setting to LINE or Y/
C.
● If the disc is dirty or damaged good playback
may not be possible. In this case either clean
the disc or change it.
Note
When the introduction title (opening movie) is played on another DVD
player only the STOP button is accepted.