JVC DR-MV4SUJ DVD VCR Combo User Manual


 
Filename [MV4S_07Basic PlayRec.fm]
Masterpage:Left+
30 EN
BASIC RECORDING
Page 30Monday, 9 May 2005 09:37
1
Load a cassette with the record safety
tab intact.
The unit’s power comes on automatically and the counter
is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly
or VHS on the remote control so that
the VHS lamp lights up on the unit.
3
Press CH +/– or the number buttons to
select the channel you wish to record.
If you record the programs received by cable box or DBS
receiver ...
1) Select “L-1” by pressing CH +/–.
2) Set the cable box or DBS receiver to the appropriate
channel.
4
Press REC MODE repeatedly to set the
recording mode.
5
Press 7 on the unit to start recording.
Or while holding 7, press 4 on the
remote control.
6
Press 9 to pause recording.
You can select channel during the Record Pause mode.
To resume recording, press 4.
7
Press 8 to stop recording.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
pg. 59) or timer recording ( pg. 31),
the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has
expired.
Recording Mode
Basic Recording (VHS)
Turn on the unit.
Turn on the TV and select the AV mode.
Accidental erasure prevention
To prevent accidental recording on
a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
CH
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Record safety tab
Recording
mode
Maximum
recording
time
(approx.)
Use
SP 2 hours
Select when the picture
quality is important.
EP 6 hours
Select when the time is
important. You can record 3
times longer than SP mode.
MV4S_07Basic PlayRec.fm Page 30 Monday, May 9, 2005 9:37 AM