JVC DR-MV4SUJ DVD VCR Combo User Manual


 
Masterpage:Right+
EN 71
Filename [MV4S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 71Monday, 9 May 2005 09:42
VIDEO IN/OUT
8 MONITOR TYPE4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to “Monitor Set” (pg. 23).
8 FRONT AUX F-1VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel. (pg. 40)
VIDEO: To use the [VIDEO] input connector on the front panel.
S-VIDEO: To use the [S-VIDEO] input connector on the front panel.
8 REAR AUX L-1VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel. (pg. 41)
VIDEO: To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO: To use the [S-VIDEO INPUT] connector on the rear
panel.
RECORDING SET
8 SAVE AS LIBRARY — OFF / ON
When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Modify
Library Information” (pg. 65).
8 XP MODE REC AUDIODOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.
DOLBY DIGITAL: To record in Dolby Digital format.
LINEAR PCM: To record in Linear PCM format.
8 2ND AUDIO RECORD — OFF / ON
When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on L/R
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.
When this function is set to “OFF”, the SAP audio cannot be
recorded.
NOTE:
When the channel is changed on the unit;
For DVD deck
The “MONO” indicator appears on the screen for about 5 seconds if
the program is a monaural broadcast.
The “STEREO” indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
Both “STEREO” and “SAP” indicators appear when a stereo program
is accompanied by SAP sound.
Both “MONO” and “SAP” indicators appear when the main audio on
the monaural broadcast is accompanied by SAP sound.
For VHS deck
The “ST” appears on the front display panel for about 5 seconds if the
program is a stereo broadcast.
The “SAP” appears on the front display panel for about 5 seconds if
the program is a SAP broadcast.
Both appear when a stereo program is accompanied by SAP sound.
DISPLAY SET
8 SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (pg. 20)
OFF: To turn off superimposed indications.
AUTO: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.
When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (pg. 71)
When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8 GRAY BACK — OFF / ON
When this function is set to “ON”, the TV screen becomes all gray
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to “OFF”.
8 DIMMERBRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT: To turn on the light on the front display panel.
DIMMED1/DIMMED2: To change the brightness level.
OFF: To turn off the light on the front display panel.
8 POWER SAVEOFF / ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
During Power Save mode —
— the front display panel will be turned off.
Power Save does not work when —
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant Timer
Recording.
— the Automatic Satellite Program Recording mode is engaged.
(
pg. 35)
It takes some time for the unit to complete initialization after you turn
on the unit power, with “WAKE UP” blinking on the front display panel.
8 ON SCREEN LANGUAGEENGLISH / FRANCAIS /
ESPAÑOL
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to “On-screen Language Set” (pg. 20).
MV4S_13Subsidiary.fm Page 71 Monday, May 9, 2005 9:42 AM