JVC DR-MV4SUJ DVD VCR Combo User Manual


 
Masterpage:Right+
EN 55
Filename [MV4S_09Advanced Operation.fm]
ADVANCED PLAYBACK
Page 55Monday, 9 May 2005 09:39
Still Picture/Frame-By-Frame Playback
1 Press 9 to pause during playback.
If there is vertical jitter, press CH +/– to correct the picture.
2 Press 9 repeatedly to activate frame-by-frame playback.
To resume normal playback, press 4.
Slow Motion
1 Press 9 to pause during playback.
2 Press and hold 9 for 2 seconds, then release. Press 9 and
release again to return to still picture.
The speed changes for each direction by pressing 3 and 5
repeatedly.
To resume normal playback, press 4.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press CH + or to eliminate the noises.
High-Speed Search
During playback, press 5 for forward high-speed search, or 3
for reverse high-speed search.
Each press of the button increases the search speed for each
direction.
When pressing 5:
(SP): +5x{+7x
(EP): +11x{+21x
When pressing 3:
Once 3 is pressed, reverse search starts in –1x normal playback
speed. After this process, each press of 3 changes the search
speed between –5x and –7x in SP mode, –11x and –21x in EP mode.
(SP): 1x]5x{7x
(EP): 1x]11x{21x
To resume normal playback, press 4.
Quick Rewind A Little
During playback, press . The unit rewinds the picture a little
(about 7 seconds) and resumes playback.
If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press 1 to 6 times to skip over unwanted
sections.
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
To resume normal playback, press 4.
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press 2 or 6 to activate Index Search. “–1” or “+1” is displayed on
the front display panel and search begins in the corresponding
direction.
To access index codes 2 through 9, press 2 or 6 repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press 2
twice.
To locate the beginning of D from the current position, press 6
once.
When the specified index code is located, playback begins
automatically.
Advanced Playback (VHS)
Turn on the unit.
Turn on the TV and select the AV mode.
Press VHS so that the VHS lamp lights up on the unit.
A
TTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of color.
you cannot hear the sound.
CH +/–
VHS
VHS
Index number
Current position
MV4S_09Advanced Operation.fm Page 55 Monday, May 9, 2005 9:39 AM