Filter
Top Products
36
Using the TV’s menu
HV-32D25EJW / LCT1271-001A-U / ENGLISH
EXT SETTING
S-IN (S-VIDEO input)
You can connect a device (such as an S-VHS
VCR) to enjoy the high-quality picture of the
S-VIDEO signal (Y/C signal).
Preparation:
• First read the device’s instruction manual
and “Additional preparation” on page 50
to connect the device to the TV properly.
Second, follow the device’s instruction
manual to set the device so that it sends an
S-VIDEO signal (Y/C signal) to the TV.
• Do not set S-IN (S-VIDEO input) to an
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture
cannot appear.
1 Choose an EXT terminal
2 Press the yellow button and set the
S-IN (S-VIDEO input).
Then press the a button
An S-IN (S-VIDEO input) mark is
displayed. You can view an S-VIDEO
signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the S-IN (S-VIDEO input)
setting:
Press the yellow button and turn off S-IN
(S-VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support
S-VIDEO signal (Y/C signal) and you
cannot set S-IN (S-VIDEO input) in
the EXT-1 terminal.
• Setting S-IN (S-VIDEO input)
changes the head character from “E” to
“S”. When an EXT terminal receives a
normal video signal, “E1”, “E2”, “E3”
or “E4” appears on the display. This
changes to “S2”, “S3” or “S5” when it
receives an S-VIDEO signal.
• Even a device which can output an
S-VIDEO signal (Y/C signal) may
output a regular video signal
(composite signal) depending on the
device setting. If a picture cannot
appear because the S-IN (S-VIDEO
input) setting has been made, read the
device instruction manual carefully
again to check for the device settings.
DIGITAL-IN
When connecting a device (such as DVD
player) which enables Dolby Digital audio
signal to be output, you can listen to Dolby
Digital audio.
Preparation:
• To listen to Dolby Digital audio, correctly
connect a device to the TV in accordance
with “Listening to Dolby Digital audio”
on page 52.
• If DIGITAL-IN is set by mistake when no
device is connected to the DIGITAL
AUDIO IN, no sound is emitted.
1 Press the 6
66
6 buttons or 5
55
5
buttons to choose an EXT terminal
HV-32D25EJW.fm Page 36 Monday, October 21, 2002 1:19 PM