JVC HV-32D25EJ CRT Television User Manual


 
48
Additional menu operations
HV-32D25EJW / LCT1271-001A-U / ENGLISH
Downloading data to a VCR
You can send the latest programme numbers
(PR) data to a VCR with the T-V LINK
function.
You can only do this when a T-V LINK
compatible VCR is connected to the EXT-2
terminal.
This only works when the T-V LINK
menu is being displayed.
1 Turn on the VCR
2 Press the a button
The data transmission begins.
The T-V LINK menu disappears once the
data transmission ends.
When the T-V LINK menu changes
over to another menu:
The TV has finished its menu. This new
menu is operated from the VCR. See the
VCR instruction manual for what to do
next.
If “FEATURE NOT AVAILABLE”
appears at the T-V LINK menu, check the
following three items.
Has a T-V LINK compatible VCR
been connected to the EXT-2
terminal?
Has the VCR power been turned on?
Does the SCART cable that connects
the EXT-2 terminal to the T-V LINK
compatible VCR have all its proper
connections?
Then press the a button to retry data
transmission.
Using the DECODER (EXT-2)
function
If you have a decoder connected to a T-V
LINK compatible VCR, which in turn is
connected to the EXT-2 terminal, use the
DECODER (EXT-2) function to unscramble
the scrambled TV channels.
1 Turn on the decoder power
2 Display the scrambled TV channel
on the TV
Even if the decoder is working, a
scrambled picture appears.
3 Press the a button to display the
MENU
The MENU (main menu) appears.
4 Press the 6 buttons to choose
FEATURES. Then press the a
button
The FEATURES menu appears.
5 Press the 6 buttons to choose
DECODER (EXT-2). Then press the
5 buttons to choose ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
6 Press the a button to complete
the setting
The T-V LINK menu appears.
HV-32D25EJW.fm Page 48 Monday, October 21, 2002 1:19 PM