Filter
Top Products
Setting up your TV
7
HV-32D25EJW / LCT1271-001A-U / ENGLISH
• If the power lamp stays red and does not
change to green:
your TV is in the standby mode. Press the
# (standby) button on the remote
control to turn your TV on.
• If the JVC logo does not appear this is
because your TV has already been turned
on for the first time:
use the “LANGUAGE” and “AUTO
PROGRAM” functions to make the initial
settings. For details, see “INSTALL” on
page 41.
2 Press the a button
The LANGUAGE menu appears.
3 Press the 6 buttons to choose
ENGLISH. Then press the a
aa
a
button
The on-screen display will then be in
English.
The COUNTRY menu appears as a sub-
menu of the AUTO PROGRAM function.
There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY menu as follows:
4 Press the 5
55
5 and 6
66
6 buttons to
choose the country where you are
• To receive SKY 1 you need a satellite
tuner. You must have the satellite tuner
set to SKY 1 before starting the AUTO
PROGRAM function which follows.
5 Press the blue button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically stored in the programme
numbers (PR).
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the programme
numbers (PR), the EDIT menu
appears
• If you want to, you can now edit the
programme numbers (PR) using the
EDIT/MANUAL function. For details,
see “EDIT/MANUAL” on page 42.
• If you do not want to edit programme
numbers (PR), go to the next step.
If “ACI START/ACI SKIP” appears
in the AUTO PROGRAM menu:
You can use the ACI (Automatic Channel
Installation) function to decode the ACI
data and complete the registration of all
the TV channels quickly. For details of
the ACI function and how to use it, see
“Using the ACI function” on page 47.
If you don’t want to use the ACI function,
press the 6 buttons to choose ACI
SKIP and then press a.
HV-32D25EJW.fm Page 7 Monday, October 21, 2002 1:19 PM