Filter
Top Products
Using the TV’s menu
41
HV-32D25EJW / LCT1271-001A-U / ENGLISH
INSTALL
LANGUAGE
You can choose the language you want to use
for the on-screen display from the language
list in a menu.
1 Choose LANGUAGE, then press
the a button
A sub-menu of the LANGUAGE function
appears.
2 Press the 5 and 6 buttons to
choose a language.
Then press the a button
AUTO PROGRAM
To receive SKY 1 you need a satellite tuner.
You must have the satellite tuner set to SKY
1 before starting the AUTO PROGRAM
function.
You can automatically store the TV channels
for which you have the best reception. Store
them in the TV’s programme numbers (PR)
list by doing the following.
1 Choose AUTO PROGRAM. Then
press the a
aa
a button
The COUNTRY menu appears as a sub-
menu of the AUTO PROGRAM function.
There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY menu as follows:
2 Press the 5
55
5 and 6
66
6 buttons to
choose the country where you are
3 Press the a button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and the TV channels you receive are
automatically registered in the
programme numbers (PR) list.
• To cancel the AUTO PROGRAM
function, press the b button.
After the TV channels have been
registered in the programme
numbers (PR), the EDIT menu
appears.
• You can now edit the programme
numbers (PR) using the EDIT/
MANUAL function. For details, see
“EDIT/MANUAL” on page 42.
• If you do not need to use the EDIT/
MANUAL function, go to the next
step.
HV-32D25EJW.fm Page 41 Monday, October 21, 2002 1:19 PM