Filter
Top Products
Filename [DR-M10SE_11Subsidiary.fm]
Masterpage:Left+
100 EN
Page 100 February 12, 2004 5:31 pm
SUBSIDIARY SETTINGS (cont.)
D
Select the band.
E
Enter the channel.
A Press rt to select “CH”, then press ENTER.
B Press rt to input the channel number you want to
store.
● To enter the registered station name (੬ pg. 103, “TV Station
And ID List”), press rt to select “ID”, then press ENTER.
Press rt.
● For fine tuning adjustment, press rt to select “FINE”, then
press ENTER. Press rt to perform fine-tuning.
● When storing a channel that sends scrambled broadcasts,
press rt to select “DECODER”, then press ENTER. Press rt
to set “DECODER” to “ON” (“OFF” is the default setting).
● When “L-2 SELECT” is set to “VIDEO”, “S-VIDEO”, “SAT
VIDEO” or “SAT S-VIDEO”, the “DECODER” setting cannot be
changed. (
੬ pg. 83, “L-2 Select Setting (L-2 SELECT)”)
F
Enter new channel information.
Press ENTER. The Confirmation screen appears.
● Repeat steps C – F as necessary.
G
Close the Confirmation screen.
Press SET UP.
● To change positions, see “Change Station Channel Position”
(in the right column).
● If you wish to set station names other than the ones registered
in your unit, see “Set Stations (B)” (
੬ pg. 102).
Delete A Channel
A
Select the item.
Press rt w e to select the item you want to delete.
B
Delete a channel.
Press &.
● The item next to the cancelled one moves up one line.
● Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press SET UP.
Change Station Channel Position
A
Select the item.
Press rt w e to select the item you want to move, then
press ENTER.
B
Select the new position.
● Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press SET UP twice.
A Press rt to select
“BAND”, then press
ENTER.
B Press rt to change the
band between CH
(regular) and CC (cable),
then press ENTER.
A
TTENTI
O
N:
Guide Program numbers are not set when channels are
stored manually. (
੬ pg. 97, “SHOWVIEW
®
System Setup”)
Perform steps A and B of “Manual Channel Set” on page 99
to access the Confirmation screen before continuing.
Perform steps A and B of “Manual Channel Set” on page 99
to access the Confirmation screen before continuing.
Press rt w e to select the
new channel position, then
press ENTER.
Example: If you moved the
station in position 4 to
position 2, the stations
originally in positions
2 and 3 each move
down one space.
DR-M10SE_01.book Page 100 Thursday, February 12, 2004 9:08 PM