Filter
Top Products
Filename [DR-M10SE_07Playback.fm]
Masterpage:Left+
44 EN
Page 44 February 12, 2004 5:09 pm
PLAYBACK OPERATIONS (cont.)
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a title (DVD-RAM,
DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD
and Audio CD).
1 Access Play Set Up Menu.
Press ON SCREEN twice.
2 Select the menu item.
Press we to select “”, then press ENTER.
● The pop-up window appears under the selected item.
3 Enter the time.
Use number keys (1–9, 0) to enter the time, then press
ENTER.
● Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
If you have specified a wrong selection,
Press & (for the last entered number) or 8 (for whole numbers)
to clear the wrong number, then enter the correct one(s) before
you press ENTER in this step.
To clear Play Set Up Menu
Press ON SCREEN.
NOTES:
● When “X” is displayed on the TV screen in step 3, you have
selected a point that excesses the recording time of the disc.
● Some DVD VIDEO discs do not contain time information, and
it is not possible to use the Time Search function. In such
cases, “X” is displayed on the TV screen as well.
● This function is not possible for a Video CD/SVCD with PBC
function.
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your
2-channel stereo system.
1 Access Play Set Up Menu.
Press ON SCREEN twice.
2 Select the menu item.
Press we to select “”, then press ENTER.
● Above the selected item, “3D-ON” appears and Simulated
Surround Effect is activated.
● Each time you press ENTER, “3D-ON” appears and disappears
alternately.
To cancel the simulated surround effect
Press ENTER to clear “3D-ON” from the screen.
NOTES:
● The simulated surround effect works correctly only when
playing back a title recorded in multichannels.
● Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the “DIGITAL AUDIO OUT” connector.
● When Simulated Surround Effect is activated, the settings of
“ANALOG AUDIO OUT” and “D. RANGE CONTROL” are
disabled. (
੬ pg. 93)
Press 1 Press 2
Press 0Press 5
DR-M10SE_01.book Page 44 Thursday, February 12, 2004 9:08 PM