Filter
Top Products
Filename [DR-M10SE_07Playback.fm]
Masterpage:Left+
48 EN
Page 48 February 12, 2004 5:09 pm
PLAYBACK OPERATIONS (cont.)
To change the settings
You can change the Parental lock settings later.
A
Change the level.
A Press rt repeatedly to select “PARENTAL LEVEL”,
then press ENTER.
B Press rt repeatedly to select the desired level, then
press ENTER.
B
Change the country code.
A Press rt repeatedly to select “COUNTRY CODE”,
then press ENTER.
B Press rt repeatedly to select your country code, then
press ENTER.
● See “Country/Area Code List for Parental Lock” (੬ pg. 49).
C
Enter your password.
Press the number keys to enter the same password as in
step D of “To set Parental Lock for the first time”, then
press ENTER.
D
Complete the setting.
Press SET UP twice.
● The normal screen resumes.
NOTE:
If you forget your password, enter “8888” in step C.
To temporarily release Parental Lock
When you set the parental lock level strictly, some discs may not
be played back at all. When you insert such a disc and try to
play it back, the confirmation screen appears on the TV screen,
asking you whether you want Parental Lock to be temporarily
released or not.
A
Access the password screen.
A Place the disc on the disc tray.
● If the disc is rated higher than the selected level, the
confirmation screen appears.
B Press we to select “YES”, then press ENTER.
● If you select “NO”, you cannot play back that disc.
B
Enter your password.
Press the number keys to enter the same password as in
step D of “To set Parental Lock for the first time”, then
press ENTER.
● When you enter the correct password, the Parental Lock is
released and the unit starts playback.
● If you enter a wrong password, “ENTRY ERROR RETRY”
appears on the TV screen. Enter the correct password.
● If you have successively entered wrong password three times,
“ENTRY ERROR CAN NOT CHANGE PASSWORD” appears
on the TV screen. In such a case, press ENTER. The disc will
stop. Then play the disc again, and try the procedure again
from step A.
NOTE:
If you forget your password, enter “8888” in step B.
Perform steps A to B of “To set Parental Lock for the first
time” on page 47 to access the “PARENTAL LOCK” screen
before continuing.
DR-M10SE_01.book Page 48 Thursday, February 12, 2004 9:08 PM