Filter
Top Products
Masterpage:Right-No-Heading
EN 99
Filename [DR-M10SE_11Subsidiary.fm]
Page 99 February 12, 2004 5:31 pm
F
View the Confirmation screen.
“SCAN COMPLETED” is
displayed on the TV screen.
Press “OK”, then the
Confirmation screen appears.
The confirmation screen lists
the channel position number
(PR), station channel number
(CH), and station name (ID)
(
੬ pg. 103, “TV Station And ID List”) of all stored
broadcast stations. The programme currently received on
the selected channel position appears behind the
confirmation screen. To view the next page, press
rt w e.
● The stations located in the selected country appear at the top
of the list.
● The Guide Program numbers will also be set automatically
during Auto Channel Set.
G
Complete the setting.
Press SET UP.
● Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 99 – 102 for the procedures.
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
● For information on scrambled broadcasts, refer to “When
Receiving A Scrambled Broadcast” (
੬ pg. 101).
NOTES:
● Fine tuning is performed automatically during Auto Channel
Set. If you want to perform tuning manually, refer to “Fine-
Tuning Channels Already Stored” (
੬ pg. 102).
● If you perform Auto Channel Set when the aerial cable is not
connected properly, “SCAN COMPLETED –NO SIGNAL–”
appears on the TV screen in step F. In such a case, make sure
of the aerial connection and press ENTER; Auto Channel Set
will start again.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels.
(
੬ pg. 101, “INFORMATION”)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(
੬ pg. 19), Preset Download (੬ pg. 21) or Auto Channel Set
(
੬ pg. 98).
A
Access the Main Menu screen.
Press SET UP.
B
Access the Confirmation screen.
A Press we to select “INITIAL SET UP”, then press
ENTER.
B Press we to select “MANUAL CH SET”, then press
ENTER.
● The Confirmation screen appears.
C
Select the channel position.
IMP
O
RTANT:
● In certain reception conditions, station names may not be
stored correctly, and Auto Guide Program Number Set may
not work properly. When the Guide Programme numbers
are not set properly, the programme that you do not
intended to record will be timer-recorded by the
S
HOWVIEW system of the unit. When programming the
timer using the S
HOWVIEW system, be sure to check the
desired channel is selected correctly. (
੬ pg. 54,
“S
HOWVIEW
®
Timer Programming”)
● Your unit memorises all receivable stations even if
reception of some of them is poor. You can delete those
stations with an unacceptable picture from the list.
(
੬ pg. 100, “Delete A Channel”)
Press rt w e to select a
blank position in which you
want to store a channel, then
press ENTER twice
. The
Manual Channel Set screen
appears.
(Example) To store in position 12.
The programme currently
received on the selected channel
position appears behind the
confirmation screen.
DVDTV
DVD
TIMER
PROG/CHECK
NEXTPREVIOUS
PAU SEREC
REC MODE LIVE CHECK
SET UP DISPLAY
ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
STANDBY/ON
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL
MEMO/MARK
DEF
CABLE/SAT
PR
SAT
#
SHOW VIEW/
VIDEO Plus
+
TV/CBL/SAT
TV TV AV
VIDEO
TV%
rtwe
ENTER
SET UP
0 – 9
DR-M10SE_01.book Page 99 Thursday, February 12, 2004 9:08 PM