Filter
Top Products
Filename [DR-M10SE_06Name.fm]
Masterpage:Left+
20 EN
Page 20 February 12, 2004 4:33 pm
INITIAL SETTINGS (cont.)
D
Perform Auto Set Up.
A Press ENTER.
● The AUTO SET/T-V LINK display appears on the TV screen.
● When you have connected the unit to a TV offering T-V Link
via a fully-wired 21-pin SCART cable (
੬ pg. 16) and the TV is
turned on, the unit automatically performs the Preset
Download (
੬ pg. 21) even if you select “AUTO SET” for Auto
Set Up function.
NOTES:
● In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
● If there is a power cut, or if you press 1 or SET UP while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the unit power once and try again from step A.
● Auto Clock Set may not function properly depending on the
reception condition.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels.
(
੬ pg. 101, “INFORMATION”)
B Press rt to move the
arrow to “AUTO
EINSTELLUNG”, then
press ENTER.
“AUTO” blinks on the front display panel; do NOT
press any button on the unit or remote control until
the front display panel shows “– –:––” as illustrated
on page 22.
● The AUTO SET screen will
appear.
A
TTENTION:
Once you have performed Auto Set Up, even if the unit’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the unit’s memory and
the unit will not perform Auto Set Up again. The unit only
performs Auto Clock Set when the unit is turned on.
If you have moved to a different area, perform each setting as
required.
● Tuner setting (
੬ pg. 98)
● Clock setting (
੬ pg. 104)
If a new station starts broadcasting in your area, perform
tuner setting. (
੬ pg. 98, “Tuner Set”)
After “Auto Set Up” is completed, perform “Monitor
Set” on page 23.
DR-M10SE_01.book Page 20 Thursday, February 12, 2004 9:08 PM