Filter
Top Products
Filename [DR-M10SE_10Editing.fm]
Masterpage:Left+
90 EN
Page 90 February 12, 2004 5:23 pm
SYSTEM CONNECTIONS (cont.)
Connecting/Using
A Decoder
The L-2 IN/DECODER connector can be used as an input
connector for an external decoder (descrambler). Simply
connect a decoder and you can enjoy a variety of
programming that is available through scrambled
channels.
A
Select the input mode.
Set “L-2 SELECT” to “DECODER”. (੬ pg. 83)
B
Connect the decoder.
Connect your unit’s L-2 IN/DECODER connector to the
decoder’s 21-pin SCART connector using a 21-pin SCART
cable.
C
Set the tuner.
Perform the procedure as described in “When Receiving
A Scrambled Broadcast” on page 101.
TV receiver
RF cable
(provided)
TV aerial
cable
L-1 IN/OUT
L-2 IN/DECODER
Decoder
DR-M10SE_01.book Page 90 Thursday, February 12, 2004 9:08 PM