Filter
Top Products
Filename [DR-M10SE_08Recording.fm]
Masterpage:Left0
54 EN
Page 54 February 12, 2004 5:15 pm
TIMER RECORDING
SHOWVIEW
®
Timer
Programming
You can programme this unit to timer-record as many as
8 programmes.
With the S
HOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
You can use the remote control to enter the S
HOWVIEW number.
A
Load a disc.
A Press x to open the disc tray.
B Place a recordable disc on the disc tray.
● For details, refer to “Placing a Disc” (੬ pg. 9).
C Press x to close the disc tray.
B
Access the SHOWVIEW screen.
Press SHOWVIEW.
C
Enter the SHOWVIEW number.
● To clear all entered numbers at a time, press 8.
● If the number you entered is invalid, “SHOWVIEW NO.
ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears
on the TV screen. Input a valid S
HOWVIEW number.
● If “GUIDE PROGRAMME IS NOT SET SELECT CHANNEL
YOU WANT TO RECORD” appears on the TV screen, set
Guide Program Numbers (
੬ pg. 97) manually.
● When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel
some of the reserved programmes. (
੬ pg. 61)
D
Check the programme data.
The SHOWVIEW number you entered and the matching
timer-recording information are displayed on the TV
screen. Check if they are correct.
● To cancel this setting, press SHOWVIEW or RETURN.
Before performing the SHOWVIEW Timer
Programming:
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Make sure that the unit’s built-in clock is set
properly.
DVDTV
DVD
TIMER
PROG/CHECK
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY
ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
STANDBY/ON
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL
MEMO/MARK
DEF
CABLE/SAT
PR
SAT
#
SHOW VIEW/
VIDEO Plus
+
TV/CBL/SAT
TV TV AV
VIDEO
TV%
rtwe
ENTER
8
x
#
0 – 9
RETURN
SHOW VIEW/
VIDEO Plus+
&
Press the number keys to
enter the S
HOWVIEW number
of a programme you wish to
record, then press ENTER.
● If you have made a mistake,
press & and input the correct
number before you press
ENTER.
IMP
O
RTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOWVIEW
®
System Setup” on page 97
and set the Guide Program number correctly.
DR-M10SE_01.book Page 54 Thursday, February 12, 2004 9:08 PM