Filter
Top Products
Masterpage:Right-No-Heading
EN 97
Filename [DR-M10SE_11Subsidiary.fm]
Page 97 February 12, 2004 5:31 pm
SHOWVIEW
®
System Setup
Guide Program Number Set
A
Access the Main Menu screen.
Press SET UP.
B
Access the “SAT/GUIDE PR” screen.
C
Enter the Guide Program number.
A Press rt to select “GUIDE PROGRAMME”, then
press ENTER.
B Press rt to select the Guide Program number for the
desired station as shown in the TV listings. Then press
ENTER.
● To change the Guide Program number in 10 increments, press
and hold rt.
D
Enter the receiving channel position number.
A Press rt to select “TV PROGRAMME”, then press
ENTER.
B Press rt to select the number of the unit’s channel
position on which the Guide Program number’s
broadcast is received by the unit or the satellite
receiver. Then press ENTER.
● Pressing AUX changes “TV PROGRAMME” to “SAT”.
● To timer-record a satellite programme with the S
HOWVIEW
system, you need to install a provided Satellite Controller and
perform the procedure described in “Satellite Receiver Control
Setting” (
੬ pg. 26).
● Repeat steps C and D as necessary.
E
Complete the setting.
Press SET UP.
IMP
O
RTANT:
Normally, Auto Set Up (੬ pg. 19), Preset Download (੬ pg. 21) or Auto Channel Set (੬ pg. 98) sets the Guide Program numbers
automatically. You need to set the Guide Program numbers manually only in the following cases.
● When timer-programming with the S
HOWVIEW system, the channel position, where the station you wish to record is received on
your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,
—Set the Guide Program number for that station manually.
● When you wish to timer-record a satellite programme with the S
HOWVIEW system,
—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
A Press we to select
“INITIAL SET UP”, then
press ENTER.
B Press we to select “SAT/
GUIDE PR”, then press
ENTER.
Guide Program Number
“Guide Program (GUIDE PROGRAMME) number” refers to
the assigned TV station numbers, according to broadcast
area, for the S
HOWVIEW timer recording. The Guide Program
numbers can be found in most TV listings.
DR-M10SE_01.book Page 97 Thursday, February 12, 2004 9:08 PM