Filter
Top Products
23
Note
SAT
LC display:
• Frequency: 1236.0 MHz
• Operating mode: SAT
• Level: 86.5 dBµV (D = digital)
Complete your frequency entry by pressing the
button.
The most recent frequency setting remains even after you switch
the MSK 125 off if it has been entered with digits and confi rmed by
pressing
.
LNB VOLTAGE AND 22 KHZ CHANGE-OVER
The LNB supply voltage is available at the RF socket. To turn on or
change the LNB voltage, press the
button.
The LNB voltage
• can be switched off = 0V
• can be adjusted from 5 V to 20 V in 0.1 V intervals
• is short-circuit proof (max. amperage 600 mA from 5 to 20 V)
Button LNB voltage
[0] 0 V
[1] 12 V
[2] 14 V
[3] 18 V
[5] 5 V
[8] 22 kHz
For checking purposes the LED right from
button is on
when the power supply is turned on.
Press the
button to indicate the power consumption of the
connected LNB on the display.
The additionally connectable 22 kHz signal will superimpose the
LNB voltage. It is necessary e.g. for the change-over of multi-feed
systems or high band/low band LNB’s.
The following voltages can be
called up via button command: