Filter
Top Products
34
SAT
FINDING INDIVIDUAL RECEPTION FREQUENCIES
The function allows you to adjust the antenna to the
maximum reception signal. The display indicates the reception in
the form of an increasing or decreasing bar. The
buttons allow you to set the measurement range to three sensitivity
levels.
The bearing sound enables you to monitor the level. The pitch of
the bearing sound is proportional to the received signal level.
The volume of the bearing sound can be adjusted using the
volume buttons.
Command overview for fi nding
Switch to “Find” mode.
Switch the measurement range, the bar graph
and the bearing sound:
Level range 1: Large input levels
Level range 2: Medium input levels
Level range 3: Small input levels
Exit this mode
LC display:
• Level range 2: Medium reception level
• SAT mode
• Bar graph display with bearing sound
Example
Launching the “Find level” function:
• Press the
button
• Slowly turn the antenna until the bar display reaches its maximum
• If necessary, decrease or increase the sensitivity using the
and buttons
• Slowly turn the antenna until you have reached the maximum
level
Exit “Find level”:
Press the
button.