Filter
Top Products
28
COMMAND OVERVIEW FOR ADDRESS BYTE
Hex Byte Description
00 All devices
10 Every LNB, matrix or SMATV
11 LNB
12 LNB with loop-through
14 Matrix (switcher)
15 Matrix (switcher) with loop-through
18 SMATV
20 Every polarizer
21 Maximum turn (full skew) in linear polarisation
22 Stepwise polarizer adjustment
30 Every positioner
31 Polar/Azimuth positioner
32 Elevation positioner
33 Combined positioner
34 LNB positioner
40 Installation help
41 Signal strength adjustment help
60 Reserved for assigned addresses
70
“Intelligent slave interface” for “Proprietary Multi-Master
bus”
71 Interface for participants and controlled head end
Fx OEM expansion
SAT
COMMAND OVERVIEW FOR FRAMING BYTE
HEX
Byte
Description
E0 Master command, one-time transmission
E1 Master command, recurring transmission
E2 Master command, expecting response, fi rst transmission
E3 Master command, expecting response, recurring transmission
E4 Response from Slave, “OK”, no errors detected
E5 Response from slave, command not supported by slave
E6 Response from Slave, parity error detected
E7 Response from slave, command not recognised