Filter
Top Products
64
...
Use the
button and the two-digit setting
storage number to select the stop line where
automatic measuring is to stop.
ENTERING THE STOP LINE FOR AUTOMATIC MEASURING
RECOVERING MEASUREMENT RESULTS FROM THE DEVICE MEMORY
The Memory Explorer command displays the stored
measuring results on the TFT display.
Use the Up and Down buttons to go a page up or
down in the screen content.
Opens the entry fi eld on the LC display for entry of
the storage place where the measurement results
are to be retrieved.
... Enter storage place 00 ... 99.
The measurement results are indicated on the TFT
display (example: measurement result no.: 02).
TFT display
LC display
TFT display
STARTING AND INTERRUPTING AUTOMATIC MEASURING
Use the cursor button to start automatic
measuring.
Automatic measuring stops at the stop line. The
measurement results are stored in the measured
value storage.
Use the cursor button to interrupt automatic
measuring.
DATA LOGGER