Filter
Top Products
52
TV MEASUREMENT
FINDING INDIVIDUAL RECEPTION FREQUENCIES
The function allows you to adjust the antenna to the
maximum reception signal. The display indicates the reception in the
form of an increasing or decreasing bar. The
buttons
allow you to set the measurement range to three sensitivity levels.
The bearing sound enables you to monitor the level. The pitch
of the bearing sound is proportional to the received signal
level. The volume of the bearing sound can be adjusted using
the
volume buttons.
LC display:
• Level range 2: Input level
• Operating mode: Terrestrial TV
• Bar graph display
Example
Launching the “Find level” function:
Press the
button.
Turn the antenna until the bar display reaches its maximum.
If necessary, decrease or increase the sensitivity using the
and buttons.
Turn the antenna until you have reached the maximum level.
To exit “Find level”:
Press the
button.
Command overview for fi nding
Switch to “Find” mode
Switch the measurement range, the bar graph
and the bearing sound:
Level range 1: Large input levels
Level range 2: Medium input levels
Level range 3: Small input levels
Exit this mode