Filter
Top Products
50
TV MEASUREMENT
COMMAND OVERVIEW FOR TV FREQUENCY ENTRY
Channel/frequency switch
... Enter frequency
Confi rm entry
and Change frequency in intervals
Example
To enter the frequency 527.25 MHz:
Press
(calling up the frequency menu)
Then
(frequency entry)
LC display:
• Frequency: 527.25 MHz (corresponds to K 28)
• Level: 61.0 dBµV
• Operating mode: Digital terrestrial TV
After calling up the frequency menu for the fi rst time you have to
enter the digit order for another frequency entry.
The most recent frequency setting remains even after you switch
the MSK 125 off if it has been entered with digits and confi rmed by
pressing
.
Note
Please note that the points before and after the channel number
refer to the precisely set channel:
CH: .10. or CH: S.04.
If you enter the frequency outside the valid channel raster, the
channel is displayed without points:
CH: 10 or CH: S 04
DVB-C/DVB-T/H MER, BER AND OFFSET MEASUREMENT
The modulation error rate (MER), the bit error rate (BER) and
the carrier frequency offset can be measured to rate the digital
reception quality.
To call up DVB-C/DVB-T/H measurement:
In CABLE digital or Terrestrial digital reception mode press the
button.