Filter
Top Products
Viewing the Calibration Score
The calibration score should be checked the first time you are
underway after installing the TracVision G8 and whenever
adjustments are made to vessel equipment that can affect the
sensor’s accuracy.
Accuracy (ACC)
The ACC data indicates the sensor’s degree of accuracy. Table 3-3
lists the five possible accuracy levels.
Magnetic Environment (MAGENV)
The MAGENV score (GOOD, OK, POOR, BAD) indicates the
quality of the installation location. If the quality is POOR or BAD,
the antenna may need to be moved to a more favorable magnetic
environment, or the source of magnetic interference needs to be
relocated.
Calibration Update Number (CAL #)
The CAL # indicates the number of times the sensor has
calibrated itself. It is used primarily to verify whether a new
calibration has been accepted by the system.
Using the MCU Interface
54-0198
79
Proceed to "Clearing the
Calibration"
Get Cal Score?
Yes Next Return
ACC MagEnv Cal#
CAL<#° XXXX #
Figure 3-24
Viewing Calibration Score
Table 3-3
Possible Compass Accuracy Levels
ACC Score Accuracy
<1º Better than 1º
<2º Better than 2º
<4º Better than 4º
<8º Better than 8º
BAD CAL Poor cal
Figure 3-25
Sample Calibration Score Screen
ACC MagEnv Cal#
CAL<1° GOOD 3
Accuracy
Magnetic Environment
Calibration Update
Number